The secret to exterior mold & mildew removal is using the right method, not the most pressure. In Boulder City, NV, we match the cleaner and pressure to the surface so it comes out clean without damage. You may also hear it called algae removal or mildew washing.
How we clean it
Is it time for exterior mold & mildew removal?
- Black, green or gray spots and film
- Slippery walkways and decks
- Musty smell near shaded walls
- Growth that returns soon after rinsing
What causes the dirt and stains
- Shade, humidity and poor air flow
- Organic debris and pollen
- Surfaces that stay damp after rain or sprinklers
Safe steps for homeowners
- Improve sun and air flow by trimming plants
- Keep gutters and sprinklers from soaking walls
- Clean small areas with an outdoor mildew cleaner, following the label
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Why more pressure isn’t better
- Blasting growth off without killing it, so it grows back fast
- Mixing cleaning chemicals, which can release toxic gas
- Damaging plants with runoff
What happens on the day
- Identify surfaces and growth
- Protect plants and fixtures
- Apply a solution that kills the growth
- Rinse at low pressure
- Post-treat where helpful to slow regrowth
This service is for outdoor surfaces. Mold inside the home, in attics or in wall cavities needs a mold remediation specialist, not a pressure washing company.
Typical exterior mold & mildew removal prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Serving Boulder City, NV and nearby towns
In Nevada, siding and stucco get dull from dust and spotted from sprinkler overspray more than from mildew. Hard-water spots need a different treatment than dirt, so we identify the stain before choosing the cleaner.
Much of Nevada has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
Some cities in Nevada limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Besides Boulder City (ZIP codes 89005 and 89006), we handle exterior mold & mildew removal in Henderson (9.4 mi), Whitney (14.1 mi), Winchester (19.1 mi) and Paradise (19.4 mi). Call (877) 658-5887 for a free quote in Boulder City.
Exterior Mold & Mildew Removal: frequently asked questions
How much does exterior mold & mildew removal cost in Boulder City, NV?
Exterior Mold & Mildew Removal typically costs $250-$700 for typical exterior growth on a home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.
Do you use high pressure for exterior mold & mildew removal?
Exterior Mold & Mildew Removal is done with soft wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.
Is exterior mold & mildew removal the same as algae removal?
Yes. Algae removal or mildew washing are other names for exterior mold & mildew removal. Whatever it's called, we use soft wash and match the pressure and cleaning solution to the surface.
Is exterior mold & mildew removal safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule exterior mold & mildew removal?
Every 1-2 years in humid or shaded areas. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.